Archive

Archive for the ‘Professional Camcorder’ Category

Red One Camera Battery

April 23, 2010 Leave a comment

Sunpow today proudly announces the release of GripFun Pro power system for Red One. The GripFun Pro is a durable, high capacity Lithium-Ion battery which is protocol-compatible for powering the innovative RED ONE camera.

Rated at 150Wh or 190Wh the GripFun Pro(PL-SL4010R,PL-SL4090R) can power your Red One for long time shooting. With 4 level LED indicator you can monitor the battery’s remaining capacity. Also with the decoded chip the GripFun Pro can communicate directly with your Red One’s viewfinder, and you can see exact percentage of remaining capacity of battery.

Equiped with both power tap connector and DC output connector you can get energy from GripFun Pro to power your camera light, wireless phone, etc. Moreover both PT and DC connector have a rubber cover. So you don’t worry about the battery get wet during rainy days.

GripFun Pro Specification:
Part Number: PL-SL4010R or PL-SL4090
Type:Li-ion
Voltage:14.8V
Capacity:150Wh or 190Wh
Dimensions: 102x153x58mm
Weight:1095g
Color: Black
Connection: Sony V-Mount

For more details please contact our sales team via email sales@sunpowtech.com

PL-SL4010R.jpg

Advertisements

Red One camera battery VS Sony V-Lock battery

April 15, 2010 Leave a comment

Since its release in year 2006 Red camera has received wide popularity from all over the world. We received a lot of inquiries for Red One camera batteries. Now Sunpow launched replacement battery which is able to communicate their status with the RED One camera. Then what’s difference between Red One camera battery and Sony V-Lock battery? Here we detail it.

1. From appearance Red One battery looks quite similar to Sony V-Lock battery. But if you looks at them carefully then you will note subtle difference. The Sony V-Lock battery normally has eight contacts(Six on side, two on top), the Red One battery has only five contacts. Plese see below pictures for details.

Red.jpg

Sony.jpg

2. Besides the subtle appreance difference, the Red One camera battery has a difference circuit board design from that of Sony V-Lock battery. Its wiring is also total different, which results in contacts layout.

3. Even though you changed V-Lock battery’s circuit board same as Red One camera battery, it also can’t communicate with Red One camera’s viewfinder. Because Red One camera has a special chip inside. So the battery has to be equiped with this chip code. Without this chip you can’t see battery’s status from viewfinder. Fortunately Sunpow already decode this chip to make its battery completely compatible with Red One camera and its viewfinder. Contact Sunpow for more details of Red One battery if you have any questions.

Sony PMW-320 camcorder battery BP-GL95

April 14, 2010 Leave a comment
After the release of PMW-EX1r and PMW-350 last year Son has announced a new member from its Sony EX series at NAB. Known as the PMW-320, the camcorder features three Exmor Full HD 1920 x 1080 CMOS sensor, and is studio-configurable, with timecode in/out, genlock in, and HD-SDI and HDMI out. In addition, the PMW-320 also supports DVCAM recording and playback. The Sony PMW-320 is priced at $12,800 (without the lens), or $14,800 (with the lens).

The Sony PMW-320 use a same li-ion battery with PMW-350. Its battery codes are BP-GL65,BP-GL95, BP-L60s, BP-L80s. Its battery can be charged by BC-L70, BC-L160 and BC-L500. Sunpow use new li-polymer battery technology to customized a battery pack for PMW-320. Here are Sunpow’s battery details.
Part Number:PL-SL4060
Type: Li-Polymer
Voltage: 14.8V
Capacity: 6000mAh
Dimension: 101x152x41mm
Weight: 680g
Replace battery code:BP-GL65,BP-GL95, BP-L60s, BP-L80s
Compatible with Sony PMW-320, PMW-350 and more professional camcorders

GripFun PL-U95 for Sony BP-U60

December 5, 2009 Leave a comment

Sunpow proudly announces its release of GripFun PL-U95 battery. The GripFun PL-U95 is specially designed to replace Sony BP-U60 battery which is compatible with PMW-EX1 camcorder. Rated at 6600mAh(95Wh), PL-U95’s capacity is much more higher than Sony original BP-U60 battery(56Wh), which means much more longer shooting time and no-worry shooting.

With special chip inside the GripFun PL-U95 is completely compatible with PMW-EX1 camcorder. It can effectively supports professional video shooting in both the field and the studio. The battery is equipped with the professional INFO function that intelligently communicates battery status data to the PMW-EX1 camcorder.

The remaining capacity of the battery is displayed on the LCD monitor and viewfinder when the camcorder is powered on. This intelligent battery-management function allows operators to monitor the battery status easily and accurately.

GripFun PL-U95 techinical specification
Type: Li-ion
Voltage:14.8V
Dimensions:13x7x4cm
Weight:550 g
Operating temperature:-20 to +45 °C (-4 to +113 °F)
Remaining capacity display:four LED (20, 40, 60, and 80%)

Buddy-Pro Professional Camcorder Battery

December 4, 2009 Leave a comment

Buddy-Pro professional camcorder battery is a great innovation which releases thousands of professionals from the heavy burden!

Buddy-Pro consists of two detachable 95W professional batteries which meets the regulations of International Air Transportation Association. No longer you are stopped at airport checkpoint because the lithium content of the batteries you carry exceeds limits. When two 95W batteries combined it offers 190W power to assure long-time enjoyable photographing.

The Buddy-Pro’s eye-catching LCD power display can tell you the remaining shooting time to keep you shoot without any interuption. Additionally the Budd-Pro comes with standard power

tap connector that can supply power for the camera light and other devices.

 

Buddy-Pro Specification:
Voltage: 14.8V
Capacity: 190W
Weight: 1.5Kgs
Size: 102x153x68mm(V-Lock)
102x153x63mm(Gold Mount)